Add printer

To link your Bambu Lab printer to SimplyPrint, we need to be able to communicate with it. To do so, we need a bit of information about your printer. All information required can be found on the screen of your printer.
If you're having trouble finding the information, please refer to the help article .

To find the IP address and access code of your printer, follow these steps:

1. First go into network settings:

Step 1

2. Here you can find the IP address and access code of your printer:

Step 2

To find the serial number of your printer, follow these steps:

1. First go into settings:

Step 1

2. Here you can find the serial number of your printer:

Step 2

To find the IP address and access code of your printer, follow these steps:

1. First go into settings:

Step 1

2. Then go into the network settings submenu:

Step 2

3. Here you can find the IP address and access code of your printer:

Step 3

To find the serial number of your printer, follow these steps:

1. First go into settings:

Step 1

2. Then press down until you reach the serial number at the bottom of the settings:

Step 2

To find the IP address and access code of your printer, follow these steps:

1. Navigate to the settings page from the home screen:

Step 1

2. Navigate to page 3 and press "LAN Only Mode":

Step 2

3. You should now see both your printer's IP as well as the access code:

Step 3

To find the serial number of your printer, follow these steps:

1. First go into settings:

Step 1

2. Navigate to page 2 and press "Device":

Step 2

3. You should now see your printer's serial number:

Step 3